When your furnace doesn’t run smoothly or stops working completely, installing a new system might sound like the best choice. But before scheduling the replacement, you’ll probably want to know how much time it will take. Will the job be finished in a few hours, or will you be without heat for most of the day?
Below, this furnace replacement company in Glencoe, Illinois is going to explain the average timeline for a furnace replacement.
The time it takes to replace a furnace varies from one home to another. Most replacements take anywhere from a few hours to a full day but there are some factors that can change that timeframe.
One of the main factors is the type of furnace you are installing. If you are replacing an old gas furnace with a new gas furnace, the replacement will be fast. But if you are switching from gas to electric, it can take longer. This is because the installation team may need to add new wiring or adjust the gas lines. These extra steps take time.
The condition of your current furnace is also a factor. If it is easy to access and in decent condition, removing it should not take long. But if the furnace is installed in a tight space or has connections that are hard to reach, the team will need extra time to remove it safely.
The best way to get an accurate idea is to speak with a trusted furnace replacement company in Glencoe, Illinois. They can tell you what you should expect based on your specific situation.
When you hire a professional furnace replacement company, the job usually follows an organized process. Here’s what happens during each step:
Step 1. First visit and estimate (1 to 2 hours): First, a technician will visit your home to inspect your current furnace. After the inspection, they will recommend the ideal furnace and give you an estimate for the project. This visit usually takes about one to two hours.
Step 2. Removing the old furnace (2 to 4 hours): Once you decide to move forward, the next step will be to remove the old furnace. This can take two to four hours depending on how hard it is to remove the old furnace. If the furnace is in good condition and easy to reach, removal should be quick. But if it is rusted or installed in a tight spot, it can take longer to disconnect and remove safely.
Step 3. Installing the new furnace (4 to 6 hours): The installation team will connect the new furnace to the gas line or electrical supply and attach it to the ductwork. They will also check for air leaks and make sure the furnace is getting proper airflow. This is the longest part of the job and takes four to six hours.
Step 4. Testing (1 to 2 hours): When the new furnace is installed, the installation team will run a safety and performance test. They will run the furnace to make sure it heats properly and does not have any leaks. They will also test the thermostat to make sure it is working properly.
In most cases, a typical furnace replacement takes around 6 to 10 hours from start to finish. If the project starts in the morning, your home should have heat again by the end of the day.
Of course, if your home needs extra work, the process can take longer. A professional furnace replacement company in Glencoe, Illinois will explain the process and answer all your questions. You will know exactly what to expect and then you can plan your day around the work.
If you’re ready to replace your furnace, John J. Cahill Plumbing, Heating & Air Conditioning is here to help. As the most trusted furnace replacement company in Glencoe, Illinois, we can remove your old furnace and make sure your new one runs perfectly. Contact us anytime at 847-864-5225 to schedule your service.