Drain cleaning is an absolute necessity for older homes. If you don’t clean your drains, you will likely experience issues like slowly draining water, foul drain odors, and more.
You might be wondering: how should you go about cleaning your drains? What methods are commonly used to clean drains? Below, this drain cleaning company in Skokie, Illinois is going to review the top four methods for cleaning your drains.
Liquid Drain Cleaning
First, we’re going to discuss liquid drain cleaning. This involves putting an enzyme-based liquid down the drain and allowing it to sit for a few hours.
Over time, this drain cleaner will break apart the residue that exists within the drain. Then, when water is run down the drain, it will take this broken-up residue with it, clearing the drain.
This isn’t the most effective method for clearing a drain. It still leaves plenty of residue behind. However, it can work for freeing up small clogs and blockages.
Snaking
The next method we’re going to discuss is snaking. This involves sending a metal wire down the drain and then snaking it back up with the use of a pulley.
As the wire comes up through the drain, it tears through residue, allowing it to drain down into the sewer line. This leaves an opening through which water can flow, allowing for a more functional drain in the future.
One thing to note here is that this doesn’t clean the drain entirely. However, your local drain cleaning company in Skokie, Illinois can use this technique to break up major clogs and blockages, allowing the drain to operate as needed.
Rodding
Rodding is the process of using long, narrow, flexible sticks as a means of jostling loose debris and residue within a drain or sewer line. It’s effective in that it can be used to access hard-to-reach areas. Sometimes used in tandem with snaking, rodding allows for a cleared, though not entirely clean drain line.
Note, however, that there are downsides to rodding. For one, it still leaves quite a bit of residue behind. This residue might not restrict waterflow, but it will allow new residue to accumulate more quickly in the future.
In addition, rodding can be time-consuming, especially when compared with other drain cleaning methods. While it has its place, it’s not always the method that will be recommended by your Skokie, Illinois drain cleaning company.
Hydro Jetting
The last drain cleaning method we’re going to discuss is hydro jetting. This entails using a jet stream of water to blast away grime and residue. This jet stream of water is released from a hose, which is snaked up and down the drain and adjoining sewer line.
Hydro jetting is far and away the most effective method for cleaning a drain. This is due to its ability to spot-clean specific areas. You can literally just point the hydro jet at a given area and blast away until all residue is removed. As such, you can eliminate all residue existing within a drain line.
Hydro jets are also effective in that they can be worked into tight corners and angles. This isn’t true of snakes or rods.
We should also mention the speed and convenience associated with hydro jetting. In most cases, you can get the job done in a single pass. Send the hydro jet down the drain line, bring it back up, and you’re done.
Looking for a Professional Drain Cleaning Company in Skokie, Illinois?
Are your drains dirty or blocked? Are you ready to have them professionally cleaned? If so, and if you’re looking for the top-rated drain cleaning company in Skokie, Illinois, look no farther than the team at John J. Cahill, Inc.
Utilizing both rodding and hydro jetting techniques, we will ensure that your drains are as clean and functional as possible. Contact us today at (847) 864-5225 to schedule an appointment.
