Replacing your air conditioner is a big investment. If you want to get the most out of it, matching the SEER ratings of your system is one of the best things you can do. It keeps your home cool and your electricity bills low.
This AC replacement contractor in Northfield, Illinois is going to explain everything you’ll need to know about this process below.
What is SEER?
SEER (short for Seasonal Energy Efficiency Ratio) is a number that shows how efficiently an air conditioner cools your home. The higher the SEER, the less energy your AC uses to cool your home. That translates to lower bills and better comfort.
But SEER depends on your indoor and outdoor units working together. If you only upgrade your outdoor unit and leave your indoor coil outdated, the whole unit will run less efficiently. That will effectively cancel out the benefits of your new AC.
Your AC can only run efficiently if its parts are the right match.
Your AC will not run efficiently if you don’t match your indoor and outdoor units. Even a high-efficiency outdoor unit will not help much if the indoor coil can’t keep up.
Carrier’s internal testing shows the implication of this. When a 14 SEER outdoor unit was paired with a 10 SEER indoor coil, the AC only achieved 12.6 SEER. That is a big drop from what you paid for.
When the parts don’t match, your AC uses more energy and wears down faster. You also get longer run times and uneven cooling. It is not the result you want after investing in a new AC.
A professional AC replacement contractor in Northfield, Illinois will understand how to properly match your system so you truly get the performance you paid for.
A well-matched AC keeps your home more comfortable.
It is not only about efficiency. A properly matched system also gives you better comfort overall. It controls humidity, runs quieter, and keeps temperatures steady.
On the other hand, when your AC parts don’t match, the unit struggles with airflow and refrigerant pressure. That causes poor humidity control, noisy operation, and uneven cooling throughout the home.
Newer units with two-stage or variable-speed compressors do an even better job. They adjust their output to meet your home’s needs. That means quieter operation, better moisture control, and more consistent temperatures.
Some of the best models can be up to 50% quieter than older single-speed units. They also remove more moisture from the air, which keeps your home comfortable even when it is sticky outside.
Professional guidance makes the whole process easier.
Buying a new AC is not as simple as selecting a model with a good SEER rating. The U.S. Department of Energy emphasizes that proper installation is key. For example, the system must be sized right for your home, the indoor and outdoor parts must match, the refrigerant levels must be set correctly, there must be good airflow, and ducts must be sealed to prevent leaks.
A full-service AC replacement contractor in Northfield, Illinois will check your home’s size, insulation, ductwork, and humidity levels. Then, they will recommend and install the right system so everything works together as it should.
New SEER2 standards make matching your unit even more important. These standards use tougher testing that reflects real-world conditions. Your new AC must meet these standards as a complete package, not just based on one part.
The difference can be huge. For example, a system with a top-tier 28 SEER2 rating uses around 1,286 kWh a year. A basic 13.4 SEER2 system uses about 2,687 kWh a year. Over 15 years, that is nearly $1,925 in energy savings. But you only get those savings if the system is properly matched and installed.
Looking for an AC Replacement Contractor in Northfield, Illinois?
If you are ready to replace your AC, John J. Cahill Plumbing, Heating & Air Conditioning is here to help. As the most trusted AC replacement contractor in Northfield, Illinois, we will make sure your system is properly matched and installed so you can enjoy reliable and efficient cooling for years to come. Contact us anytime at 847-864-5225 to schedule your AC service.
